User Manual Q&AAnswer
Mar 06, 2025 - 12:41 AM
To install the , it is recommended to hire a skilled electrician to ensure safety and avoid the risk of fire or electric shock. The actuator should be installed in a location with a temperature range of -20°C to +50°C and a relative humidity of less than 75%. The actuator has dimensions of 49x51 mm and a depth of 20 mm. It is important to note that the actuator is not suitable for controlling incandescent lamps.
The actuator can be controlled wirelessly using universal pushbuttons, direction pushbuttons, and central control pushbuttons. It can also be controlled locally using a conventional control switch if it was previously installed. The actuator supports zero passage switching and bidirectional wireless switching. In case of a power supply failure, the actuator will switch off in a defined mode.
To teach-in wireless pushbuttons or sensors, specific tapping sequences need to be followed. For example, to teach-in a universal pushbutton, tap it briefly three times. To teach-in a direction pushbutton, tap it briefly four times, with the top part representing 'Up' and the lower part representing 'Down' and 'Stop'. The actuator can also be taught-in with window contacts, window handle sensors, timer switches, and GFVS software.
The actuator supports encrypted sensors, and the teach-in mode can be blocked or unlocked using specific tapping sequences. The memory content can be cleared to restore the actuator to its as-delivered state. The actuator also has tap reverse activation and deactivation functions, as well as switch on/off confirmation telegrams.
For more detailed information and instructions, please refer to the Eltako FJ62NP-230V Wireless Shading Element and Roller Shutter Actuator Instruction Manual available at the following link: [Manual Link](http://eltako.com/redirect/FJ62NP-230V)
Add New Comment