User Manual Q&AAnswer
Mar 06, 2025 - 12:38 AM
To install the Leuchten Direkt 13722-18 HOLLY Direct Luminaires, please follow the steps below:
1. Before installation, ensure that the power supply is turned off to avoid any electrical hazards.
2. Determine the desired location for the luminaire. Ensure that it is suitable for the installation and provides adequate support.
3. Remove the luminaire from its packaging and carefully inspect it for any visible damage. If any damage is found, do not proceed with the installation and contact the customer service provided in the manual.
4. Locate the mounting bracket included with the luminaire. Attach the bracket securely to the desired installation surface using appropriate screws and anchors. Ensure that the bracket is level and stable.
5. Connect the electrical wires from the power supply to the luminaire. Follow the wiring diagram provided in the manual to ensure correct connections. It is recommended to consult a qualified electrician if you are unsure about the wiring process.
6. Once the electrical connections are made, carefully attach the luminaire to the mounting bracket. Ensure that it is securely fastened and properly aligned.
7. Turn on the power supply and test the luminaire to ensure it is functioning correctly. If any issues are encountered, refer to the troubleshooting section of the manual or contact the customer service provided.
8. After installation, clean the luminaire with a soft, dry cloth to remove any dust or debris.
Please note that the above instructions are a general guideline. It is important to refer to the specific instructions provided in the Leuchten Direkt 13722-18 HOLLY Direct Luminaires Instruction Manual for accurate and detailed installation steps.
Add New Comment