How do I install the Foshan Huazhao Electronics HZ50 LED Whip Light? (Foshan Huazhao Electronics LED Whip Light User Guide)

Answer

manuals.plus

Mar 06, 2025 - 12:28 AM


To install the Foshan Huazhao Electronics HZ50 LED Whip Light, please follow these steps:

Step 1: Mount Up
- Remove the bottom nut and spring washer from the quick-release mount.
- Mount the LED Whip into any open bolt mount on your vehicle, ensuring that the flat washer is placed between the whip and the mount.
- Place the spring washer underneath the mount and re- xxxx  the bottom nut.
- If you have a pair of LED Whips, repeat the process to mount the second whip.

Step 2: Get wired!
- Connect the battery cord to the bottom hanging cord of your LED Whip.
- If you have a pair of LED Whips, connect the 3-prong plug from the master LED Whip to the plug coming from the slave LED Whip. Note that the slave LED Whip cannot function without being connected to the master LED Whip.
- Feed the power cord through to your vehicle battery.
- Connect the terminal wire to the positive (+) and negative (-) terminals of your vehicle battery.
- Use zip ties to hide any extra wiring.

Step 3: Use the supplied cap to keep dirt and debris out of the connector when the whip is not attached to the base.

Step 4: Use the flag mounts to secure the flag to the whip.

Please note that it is recommended to have the installation performed by a licensed professional to avoid voiding the warranty.

For more detailed instructions and safety information, please refer to the Foshan Huazhao Electronics HZ50 LED Whip Light User Guide provided with the product.