Answer

Mar 06, 2025 - 12:13 AM
To mount the Klipsch RP-440D SB soundbar on the wall, follow these steps:
1. Determine a suitable location for the soundbar and complete all wiring before mounting.
2. Use the included template to choose the mount position for the soundbar (horizontal or vertical).
3. Pin the template to the wall, ensuring it is level (for horizontal mounting) or plumb (for vertical mounting) and positioned correctly.
4. Mark the pilot hole locations on the wall through the template and remove the template.
5. Pre-drill pilot holes in the marked locations. If drilling into a wall stud, use #10 mounting screws (not included) to mount the soundbar bracket. If there is no stud, install wall anchors (not included) into the pilot holes to hold the bracket.
6. If vertical wall-mounting, feed the speaker wire into the bottom area of the soundbar and attach each wire to the appropriate xxxx -terminal binding post. If horizontal wall-mounting, feed the speaker wire through the channel(s) on the back center part of the soundbar and attach each wire to the appropriate xxxx -terminal binding post.
7. Gently push the soundbar onto the mounted bracket through its keyholes and push it down to lock it into position.
Please refer to the "Speaker/Sound Bar On-Wall Installation" section of the user manual for more detailed instructions and diagrams.
Add New Comment