User Manual Q&AAnswer
Mar 06, 2025 - 12:06 AM
To install the QAZQA 104528 Sarina CL 1 Copper light fixture, please follow the instructions provided in the manual carefully. Here is a step-by-step guide:
1. Ensure that the installation is carried out by authorized and qualified technicians in accordance with the valid regulations for electrical installation.
2. Before starting the installation, switch off the electrical supply at the distribution box using a switch.
3. Make sure that the exterior lighting is not installed during rain.
4. Consider the minimal separation distance from other objects and the required room around the fitting.
5. If you are unsure about the installation process, it is recommended to consult a professional, taking into account local installation requirements. Some countries may require lighting to be installed only by registered installers.
6. Adequately tighten the clamping screws in electrical connections, especially for 12V low voltage conductors.
7. When replacing a halogen lamp, wait for it to cool down for a minimum of 5 minutes.
8. Clean the fixture with a clean, dry cloth or brush, avoiding the use of solvents or abrasives. Ensure that no dampness comes into contact with electrical components.
9. Take into account all available technical information provided.
10. Pay attention to the symbols when connecting wires: N for Neutral, L for Live, and Earth for the earth connection.
11. The fixture is designed for indoor use only, where direct contact with water is impossible.
12. Refer to the symbol indicating the level of water-proof and dust-proof protection.
13. Check the protection class of the fixture: Class I requires earthing, Class II is double insulated and does not require earthing, and Class III is low voltage.
14. Consider the minimum distance from lighted objects as indicated in meters.
15. Use only the specified self-shielded halogen lamp with the luminaire.
16. Strip the wire to the indicated length in millimeters, as different items may require different lengths.
17. Connect using the specified cable, as different items may require different cables.
18. Ensure that the type of lamp, maximum size, and wattage indicated in each lighting unit are not exceeded. Different items may require different types of light sources with different bulb icons.
19. Confirm that the fixture is designed to work only with the indicated voltage. Different items may require different working voltages.
20. Check if the luminaire can be used in combination with a dimmer.
21. Take note of the reference light angle and light space of the luminaire.
22. Dispose of the luminaire in a staging area for electrical waste and not with normal domestic waste in a standard rubbish can.
If you have any further questions or need additional assistance, please refer to the QAZQA 104528 Sarina CL 1 Copper Instruction Manual or contact the manufacturer directly.
Add New Comment