User Manual Q&AAnswer
Mar 05, 2025 - 11:54 PM
To install the MATTEO C75324 Stellar Chandelier, please follow the steps below:
1. Ensure that the power is completely off at the fuse box before starting the installation.
2. It is recommended to have the fixture installed by a qualified licensed electrician for safety reasons.
3. Prepare a clear area for installation and wear gloves throughout the installation process.
4. Read the instructions carefully before starting the assembly and keep the instruction sheet for future reference.
5. Please note that all Matteo Lighting fixtures come with pre-wired modules. Avoid touching any part of the module(s) unless instructed to do so, as unnecessary contact could cause permanent damage.
6. Mount or support the luminaire in a junction box that meets the CE Luminaire standards.
7. Switch off the main power supply.
8. Connect all tubes together.
9. Fit the mounting bracket onto the mounting surface using self-tapping screws.
10. Connect the wires according to color (White to White, Black to Black). Connect all earth plugs together onto the crossbar using the green xxxx to ensure a tight connection.
11. Fit the ceiling plate onto the mounting bracket using screws.
12. Install the lamps firmly into the lampholders.
13. Fix the glass securely.
14. Finally, reconnect the power.
For further assistance or technical support, you can contact Matteo Lighting at their toll-free number 1-844-628-8368 or email them at info@matteolighting.com. Additionally, you can visit their website at www.matteolighting.com.
Add New Comment