Answer

Mar 05, 2025 - 11:51 PM
To adjust the vacuum, sealing, and cooling times on the VacPak-It 186UVMC10, follow these steps:
1. Press the "Set" button on the control panel when the vacuum cover is open to switch between the settings.
2. When the "Vacuum" light is illuminated, use the "Up/Down" buttons to adjust the vacuum time. The range is 5-90 seconds.
3. When the "Sealing" light is lit, use the "Up/Down" buttons to adjust the sealing time. The range is 0-6 seconds.
4. When the "Cooling" light is on, use the "Up/Down" buttons to adjust the cooling time. The range is 0-10 seconds.
5. The corresponding indicator light will light up when switching settings using the "Set" button. Adjust the time through the "Up/Down" buttons.
6. Once you have adjusted the desired times, press the "Set" button until all lights on the control panel are off. The new times will be saved and the machine is ready to use.
Please refer to the user manual for more detailed instructions and information on other functions of the VacPak-It 186UVMC10.
Add New Comment