User Manual Q&AAnswer
Mar 05, 2025 - 11:48 PM
To change the drill bit on the DEWALT D25133, D25262 Heavy Duty SDS Plus Rotary Hammers, follow these steps:
1. Turn off the rotary hammer and disconnect it from the power source.
2. Hold the chuck sleeve (F) and pull it back to release the current drill bit.
3. Remove the old drill bit from the chuck.
4. Insert the new drill bit into the chuck, making sure it is securely held.
5. Release the chuck sleeve to lock the new drill bit in place.
6. Ensure the drill bit is properly aligned and tightened before using the rotary hammer.
For more detailed instructions and safety precautions, please refer to the instruction manual provided with your DEWALT rotary hammer.
Add New Comment