User Manual Q&AAnswer
Mar 05, 2025 - 11:45 PM
To insert batteries in the Riester EliteVue Otoscope, follow these steps:
1. For battery grips type C and AA with rheotronic® 2.5 V, turn the battery grip cover anti-clockwise at the lower part of the handle.
2. Insert the required standard alkaline batteries into the battery grip with the plus side pointing towards the upper part of the grip.
3. xxxx the battery grip cover firmly back onto the battery grip.
To remove batteries from the Riester EliteVue Otoscope, follow these steps:
1. For battery grips type C and AA with rheotronic® 2.5 V, turn the battery grip cover on the lower part of the battery grip anti-clockwise.
2. Take the batteries out of the battery grip by holding the opening of the battery grip slightly downwards and shaking if necessary.
3. xxxx the battery grip cover firmly back onto the battery grip.
Note: Before start-up, remove the red safety foil on the plus side of the batteries. Also, ensure that there is no insulation on the spring of the battery grip cover when using specific rechargeable batteries.
Please refer to the Riester EliteVue Otoscope user manual for more detailed instructions and safety precautions.
Add New Comment