Answer

Mar 05, 2025 - 11:27 PM
To pair the Bluetooth speaker on the HOVER-1 SYPHER Electric Self-Balancing Hoverboard, follow these steps:
1. Turn on your hoverboard. The speaker will "ping" to indicate that it is waiting for a Bluetooth connection and is in pairing mode.
2. Make sure your hoverboard and the Bluetooth device you want to pair are within the operating distance, preferably no further than 3 feet (1 meter) apart.
3. Enable Bluetooth on your phone or music device. Refer to the manufacturer's instructions for how to enable Bluetooth on your device.
4. Once Bluetooth is enabled on your device, select the option "H1-SYP" from the list of available Bluetooth devices.
5. If prompted, enter the PIN code "000000" and confirm the entry.
6. The speaker will say "paired" when the pairing is successful.
7. Note that the pairing mode on the hoverboard will last for two minutes. If no devices are paired within that time, the hoverboard speaker will automatically return to standby mode.
8. If the pairing is unsuccessful, turn off the hoverboard and try again, following the previous steps.
9. Once you have paired the hoverboard speaker with a device, the speaker will remember the device and automatically pair when the device's Bluetooth is activated within range. You do not need to re-pair previously connected devices.
Please refer to the HOVER-1 SYPHER Electric Self-Balancing Hoverboard User Manual for more detailed instructions and troubleshooting tips.
Add New Comment