User Manual Q&AAnswer
Mar 05, 2025 - 11:25 PM
To assemble the Hover-1 Beast Buggy, please follow these steps:
1. Remove all contents from the box and ensure that all parts listed in the "PARTS LIST" section are present.
2. Insert the left and right handlebar mounts into the seat frame, aligning the holes of the mounts with the holes in the seat frame. Secure them using the provided screws and nuts.
3. Insert the frame extensions into the seat frame with the foot rests pointing down. Adjust the front frame to your preferred length. Insert one locker into the seat frame holes, add the washer and cap, and twist them on clockwise until tightly secured. Repeat this step on the other side with the other locker.
4. Align the holes of the seat with the holes of the seat frame. Insert the screws and attach the washers and nuts underneath the seat frame. Tighten the screws securely.
5. Align the holes of the wheel plate with the holes in the frame extension. Insert the screws and attach the lug nuts. Tighten the screws securely.
6. Your Hover-1 Beast Buggy is now fully assembled.
For visual reference, please refer to the diagram provided in the manual.
Note: Make sure to tighten all screws and nuts before riding to ensure the stability and safety of the Beast Buggy.
Add New Comment