User Manual Q&AAnswer
Mar 05, 2025 - 11:22 PM
To install the Neomounts FPMA-CB100BLACK Dual Monitor Adapter, please follow the steps outlined in the instruction manual:
Step 1: Connect the crossbars with the intermediate piece.
Step 2: Attach the VESA plates to the crossbar.
Step 3: Install the cable clips.
Step 4: Attach the crossbar to a VESA plate.
Step 5: Install the monitors.
Please note the following precautions and recommendations for safe installation:
- Read the instruction manual carefully before installation and follow the instructions to ensure safety.
- The manufacturer is not responsible for any equipment damage or personal injury caused by incorrect installation or operation.
- The mount should be installed by qualified personnel.
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Avoid installing the product in places subject to high temperatures, humidity, water, air conditioning vents, excess dust and fumes, slanted surfaces, shock, vibration, or direct exposure to bright light.
- Maintain sufficient space around the display for adequate ventilation.
- Ensure the wall, ceiling, or floor where the mount will be installed is strong enough to sustain a weight of at least four times the combined weight of the display and mount.
- Do not modify any accessories or use broken parts.
- Tighten all screws without exerting excessive force to avoid damage.
- Stains may occur on the wall, ceiling, or floor after extended use.
- The warranty of the product covers only the body of the mount and is valid for 5 years.
For any further questions or disputes, please consult the English language manual or contact your dealer.
Add New Comment