User Manual Q&AAnswer
Mar 05, 2025 - 11:21 PM
To install the TERMA 2046BTU Alex One Electric Towel Rail, please follow the steps below:
1. Before starting the installation, make sure you have all the necessary parts and tools. Also, ensure that you have the required standard 1/2" radiator valves.
2. Check for any hidden wires or pipes behind the wall before drilling holes for the brackets.
3. The plugs provided are suitable for hard walls masonry only. Make sure you are using the correct plug for your wall type.
4. TERMA radiators are designed for closed heating systems.
5. The radiator should be fitted at least 100 mm from the floor to maximize heat efficiency.
6. Mark out the position of the brackets on the wall, considering the distances between bracket centers.
7. Drill holes to approximately 80 mm depth using a 10 mm drill bit and insert rawl plugs. Attach the mounting bracket-1 using a connecting xxxx with a washer.
8. Guide the radiator brackets into the mounting brackets-1 and fix them with connecting screws.
9. Connect the water flow using appropriate 1/2" BSP valves. Follow the valve manufacturer's guidelines for correct installation.
10. Fill the radiator with water and purge any trapped air through the bleed valve located at the top of the radiator.
11. After installation, wipe the radiator down using a clean damp cloth. Avoid using scourers or abrasives.
For more detailed instructions and illustrations, please refer to the TERMA 2046BTU Alex One Electric Towel Rail Instruction Manual.
Add New Comment