User Manual Q&AAnswer
Mar 05, 2025 - 11:19 PM
To drain the condensate from the compressor, follow these steps:
1. After approximately 2-4 hours of use, the condensate that has formed must be drained from the receiver.
2. Locate the drain valve on the compressor. It is usually located at the bottom of the receiver tank.
3. Make sure the compressor is turned off and unplugged from the power source.
4. Place a suitable container or bucket below the drain valve to collect the condensate.
5. Slowly open the drain valve by turning it counterclockwise. Be cautious as the condensate may be hot.
6. Allow the condensate to drain completely into the container.
7. Once all the condensate has been drained, close the drain valve by turning it clockwise.
8. Dispose of the collected condensate according to local regulations.
Please refer to the instruction manual for more detailed information and safety precautions regarding draining the condensate from the Gude 50129 260/10/50 Compressor.
Add New Comment