User Manual Q&AAnswer
Mar 05, 2025 - 10:55 PM
To install the RAB H17XL UFO LED High Bay fixture, you have three mounting options: hook mounting, ceiling mounting with an accessory kit, or pendant mounting with an accessory kit. Here are the installation steps for each option:
1. Hook Mounting:
- xxxx the hook into the fixture and tighten it securely.
- Hang the fixture on the ceiling hook or chain.
- After installation, connect the fixture's wire to the mains using appropriate UL approved wire connectors.
2. Ceiling Mounting (with accessory kit):
- Mark the mounting surface and drill holes accordingly.
- Fix screws into the holes using a hammer.
- Align the bracket holes with the xxxx holes, push the fixture to one side, and tighten the screws.
- After installation, connect the fixture's wire to the mains using appropriate UL approved wire connectors. You can adjust the fixture vertically by adjusting the bracket screws.
3. Pendant Mounting (with accessory kit):
- Unscrew the nuts on the 1/2" NTP stem.
- Insert the 1/2" NTP stem into the bracket hole and re- xxxx the nuts.
- After installation, connect the fixture's wire to the mains using appropriate UL approved wire connectors. You can adjust the fixture vertically by adjusting the bracket screws.
Please note that all wiring must be done in accordance with the National Electrical Code and local codes. Proper grounding is required for safety. It is essential to have the installation performed by a person familiar with the construction and operation of the product and the associated hazards.
For more detailed instructions and diagrams, refer to the RAB H17XL UFO LED High Bay fixture manual.
Add New Comment