User Manual Q&AAnswer
Mar 05, 2025 - 10:27 PM
To connect the cleaner to the control unit, follow these steps:
1. Connect the cleaner cable to the control unit.
2. Plug the control unit cord into a protected electrical outlet.
Make sure to follow the safety instructions provided in the manual, such as not using an extension cord and ensuring the control unit is located at least 3.5 meters (11.5 ft) from the closest edge of the pool.
For more detailed instructions and safety precautions, please refer to the "Control Unit Set-Up" section in the Hayward AquaVac 6 Series Robotic Cleaner Instruction Manual.
Add New Comment