Answer

Mar 05, 2025 - 10:11 PM
To perform the auto-tune for thermal protection on the welldana ECO-SWIM Control Panel, follow these steps:
1. Ensure that the control module is properly connected to the electrical supply and the pump.
2. Power on the control panel.
3. The controller will automatically perform an auto-calibration of the thermal protection at the first start-up.
4. During the auto-tune process, the controller will measure the pump's thermal characteristics and set the appropriate protection parameters.
5. Once the auto-tune is complete, the controller will be ready for operation.
Please refer to the instruction manual for more detailed information on the auto-tune process and any specific steps that may be required for your model of the control panel.
Add New Comment