Answer

Mar 05, 2025 - 10:03 PM
To connect your computer to the internet using the Routers 2520104 AC1200 Wi-Fi 4G LTE Router, follow these steps:
1. Make sure the router is powered on and connected to a power source.
2. Connect your computer to the router using an Ethernet cable or via Wi-Fi.
- For a wired connection, plug one end of the Ethernet cable into the LAN port on the router and the other end into the Ethernet port on your computer.
- For a wireless connection, search for available Wi-Fi networks on your computer and select the network name (SSID) of the router. Enter the Wi-Fi password if prompted.
3. Once connected, open a web browser on your computer and enter the router's default IP address (e.g., 192.168.1.1) in the address bar.
4. You will be prompted to enter a username and password to access the router's settings. Refer to the instruction manual or the default credentials provided with the router to log in.
5. Once logged in, navigate to the internet settings or WAN settings section of the router's interface.
6. Select the appropriate internet connection type (e.g., DHCP, PPPoE, Static IP) based on your internet service provider's requirements.
7. Enter the necessary information provided by your ISP, such as username, password, IP address, subnet mask, gateway, and DNS servers.
8. Save the settings and restart the router if prompted.
9. After the router restarts, your computer should be connected to the internet through the Routers 2520104 AC1200 Wi-Fi 4G LTE Router.
For more detailed instructions or troubleshooting steps, please refer to the instruction manual provided with the router or visit the manufacturer's website for support.
Add New Comment