User Manual Q&AAnswer
Mar 05, 2025 - 09:55 PM
To install the batteries in the ANDERIC RRCM7500 remote control, please follow these steps:
1. Locate the battery compartment on the back of the remote control.
2. Use a screwdriver to remove the xxxx securing the battery cover, if necessary.
3. Insert two AA batteries into the battery compartment, making sure to match the polarities (+ and -) correctly.
4. Slide the battery cover down toward the bottom of the remote to remove it.
5. Replace the battery cover after installing the batteries. Note that the battery cover xxxx is optional and is not needed to secure the battery cover to the remote.
Please refer to the user manual for visual instructions and additional information.
Add New Comment