User Manual Q&AAnswer
Mar 05, 2025 - 09:52 PM
To install the SAL SDD400SFI SFI Anti-Flicker Dimmer, please follow these steps:
1. Switch off the mains electricity supply before starting the installation.
2. Check the load compatibility and ensure that the loads are SFI dimmable fittings only.
3. Connect the dimmer according to the wiring diagram provided in the instruction manual.
4. Once the wiring is complete, energize the dimmer by turning on the mains electricity supply.
5. Press the dimmer button once and allow 5 seconds for self-calibration. During this process, the lights will turn off and on and slowly change brightness. The LED indicator on the dimmer will flash during calibration. When the LED indicator stops flashing and the lights' brightness remains constant, the calibration is complete.
Please note that the installation of this dimmer should be done by a licensed electrician and is only compatible with SAL SFI fittings.
For more detailed instructions and information, please refer to the SAL SDD400SFI SFI Anti-Flicker Dimmer Instruction Manual.
Add New Comment