User Manual Q&AAnswer
Mar 05, 2025 - 09:37 PM
To use the RING RTC600 Digital Tyre Inflator, please follow these steps:
1. Ensure that the power cable is fully unwound before use to prevent overheating.
2. Connect the power cable to a 12VDC power supply.
3. Attach the air hose to the tyre valve stem securely.
4. Press the power button to turn on the inflator.
5. Set the desired pressure using the "+" and "-" buttons on the control panel. The gauge on the inflator is for guidance only, so it is recommended to check the pressure with a known accurate gauge.
6. Once the desired pressure is set, press the power button again to start inflation.
7. The inflator will automatically stop inflating when the set pressure is reached. The auto-stop feature prevents over-inflation and ensures the tyre is properly inflated.
8. If you need to stop the inflation process before the set pressure is reached, press the power button again to stop the inflator.
9. After inflation, disconnect the air hose from the tyre valve stem.
10. Turn off the inflator by pressing and holding the power button for a few seconds.
11. Store the inflator in a safe place.
Please note that the RING RTC600 Digital Tyre Inflator can be used without the engine running, but it will drain power from the battery. It is recommended to use it while the engine is running to avoid battery drain.
For further information and troubleshooting, please refer to the user manual provided with the product.
Add New Comment