User Manual Q&AAnswer
Mar 05, 2025 - 09:33 PM
To install the AURORA EN-LN1540BLK InterLED 1500mm 40W Linear Non-Dimmable light fixture, please follow these steps:
1. Before starting the installation, make sure to switch off the electricity at the mains to ensure safety.
2. Determine whether you want to surface mount or suspend the light fixture. Choose the appropriate installation method based on your preference and the available space.
3. For surface mounting, securely attach the light fixture to the desired surface using the provided mounting brackets or screws. Ensure that all electrical connections are tight and there are no loose strands.
4. For suspension mounting, use appropriate suspension cables or chains to hang the light fixture from the ceiling. Make sure to securely fasten the cables or chains to ensure stability.
5. Connect the electrical wires to the light fixture. The brown wire should be connected to the live (L) terminal, the grey wire to the neutral (N) terminal, and the green/yellow wire to the earth terminal. Ensure all connections are tight.
6. Once the electrical connections are made, double-check that everything is secure and properly installed.
7. After completing the installation, switch on the electricity at the mains and test the light fixture to ensure it is functioning correctly.
Please note that this light fixture is not dimmable and must be used with a maximum input voltage of 220-240V AC 50/60Hz. Additionally, it is important to follow the current edition of the National Wiring Regulations and consult a qualified electrician if you have any doubts or questions regarding the installation process.
For further compatibility information, such as using the light fixture with PIRs or mixing LED circuits with other products, it is recommended to contact the sales office for assistance.
Remember to refer to the instruction manual provided with the product for detailed installation instructions and any additional information.
Add New Comment