Answer

Mar 05, 2025 - 09:27 PM
To insert or replace the batteries in the VOLTCRAFT BS-200XW Endoscope, follow these steps:
1. Loosen the xxxx using a Phillips screwdriver and remove the cover of the battery compartment.
2. Take out the battery holder from the battery compartment.
3. Insert four AA batteries into the battery holder, making sure to observe the polarity markings inside the battery holder bays.
4. Put the battery holder back into the battery compartment, aligning the polarity markings on the top of the battery holder and inside the battery compartment.
5. Close the battery compartment securely.
It is important to replace the batteries when the battery LED is on to ensure proper functioning of the endoscope.
Add New Comment