Answer

Mar 05, 2025 - 09:24 PM
To install and set up the TELTONIKA TSW304 Ethernet Switch, follow these steps:
1. Connect your main internet router/modem to the TSW304 switch using an Ethernet cable. The router/modem should have an available Ethernet port.
2. Connect your end devices (computers, printers, etc.) to the TSW304 switch using Ethernet cables. The switch has four ports labeled 1 to 4 for connecting devices.
3. Connect the 2-pin power plug to the TSW304 switch to power it up. The switch supports an input voltage range of 7-57 VDC or 9-40 VAC.
Once the switch is powered on and connected, it will start routing network traffic between your main router/modem and the connected devices.
For more detailed information and troubleshooting, you can refer to the TELTONIKA TSW304 Ethernet Switch User Guide available at the following Internet address: https://wiki.teltonika-networks.com/v...
Please note that the TSW304 switch consumes a maximum power of 1.44 W and supports a maximum Ethernet cable length of 100 meters.
Add New Comment