Answer

Mar 05, 2025 - 09:21 PM
To install the SHADA T0TG124P 4P System Side Case Racks on your Triumph Tiger 1200 GT, please follow the installation instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, ensure that you have all the necessary parts and tools required.
2. Begin by removing any existing luggage racks or brackets from your motorcycle, if applicable.
3. Take the left side case rack and align it with the mounting points on the left side of your motorcycle. Make sure the rack is positioned correctly and securely.
4. Insert the provided screws through the mounting holes on the rack and into the corresponding holes on your motorcycle. Do not fully tighten the screws at this stage.
5. Repeat the same process for the right side case rack on the right side of your motorcycle.
6. Once both racks are aligned and attached, double-check their positioning and alignment. Ensure that they are symmetrical and level.
7. Now, you can begin tightening the screws. Start by lightly tightening each xxxx , gradually increasing the tightness until they are securely fastened. Be careful not to overtighten the screws, as this may damage the racks or your motorcycle.
8. After tightening all the screws, give the racks a final inspection to ensure they are securely attached and aligned properly.
9. Once the racks are installed, you can proceed to attach the side cases according to the instructions provided with the cases themselves.
Remember, it is essential to refer to the specific instructions provided in the SHADA T0TG124P 4P System Side Case Racks manual for your Triumph Tiger 1200 GT. Always follow the manufacturer's guidelines and recommendations for a safe and secure installation.
Add New Comment