User Manual Q&AAnswer
Mar 05, 2025 - 09:14 PM
To properly secure the inflatable, follow these steps:
1. After fully inflating the inflatable, locate all of the tie-down points around the base.
2. Place a stake through each loop and press the stake about 2/3 of the way into the ground. These stakes help hold the inflatable upright and prevent it from being moved by the wind.
3. For inflatables under 9 feet tall, install at least three upper tie downs. For inflatables over 10 feet tall, you will need to install four or more upper tie downs, depending on the size of the inflatable.
4. Attach each rope to a clip and attach the clip onto the upper fabric or metal loops. If clips are not included, tie each rope directly to the loop.
5. Tie the ropes to additional ground stakes and secure the stakes about 2/3 of the way into the ground.
6. To achieve a proper 45-degree angle, the stake distance (SD) from the inflatable should be roughly equal to the loop height (LH) on the inflatable. For example, if the loop height is 6 feet, the stake should be placed 6 feet away from the inflatable.
7. The angle of the rope to the ground should be 45 degrees. Adjust stakes as needed to ensure that the inflatable is fully upright and positioned correctly.
8. When the inflatable is correctly positioned and all stakes have been placed, push all of the stakes fully into the ground.
Following these steps will help secure your inflatable and prevent it from being blown over or moved by strong winds.
Add New Comment