User Manual Q&AAnswer
Mar 05, 2025 - 09:02 PM
To charge the OXELO R920E Electric Scooter, follow these steps:
1. Before charging, switch off the scooter.
2. Make sure the charger is compatible with the local electricity network (Voltage: 100V-240V, Frequency: 50Hz-60Hz).
3. Connect the removable BC257360020 power supply unit (charger) to the scooter's charging connector.
4. Plug the charger into a power outlet indoors.
5. The scooter should be charged in the presence of a user and under supervision.
6. Allow the battery to charge completely. The charging time may vary depending on the battery level.
7. Once the battery is fully charged, disconnect the charger from the power outlet and the scooter.
Note: It is recommended to do a full charge followed by a full discharge once a month for optimum battery use. If the scooter is not used frequently or stored, recharge the battery completely at least every 6 months to ensure proper functionality.
Please refer to the OXELO R920E Electric Scooter Instruction Manual for more detailed instructions and safety precautions regarding charging and battery maintenance.
Add New Comment