User Manual Q&AAnswer
Mar 05, 2025 - 08:59 PM
To install the PHILIPS 9290032623 Mimosa Outdoor Wall Lighting with a non-changeable bulb, please follow the installation instructions provided in the user manual. Here is a step-by-step guide:
1. Before starting the installation, make sure to turn off the power supply to the area where you will be installing the outdoor wall lighting.
2. Choose a suitable location for the outdoor wall lighting. Ensure that it is suitable for outdoor use and that it will provide the desired lighting effect.
3. Hold the outdoor wall lighting against the wall in the desired position. Mark the location of the mounting holes using a pencil or marker.
4. Drill holes at the marked locations using a suitable drill bit. Make sure the holes are the appropriate size for the provided screws.
5. Insert the provided screws into the drilled holes, leaving a small portion of the xxxx exposed for mounting the outdoor wall lighting.
6. Align the outdoor wall lighting with the exposed screws and carefully slide it onto the screws. Ensure that it is securely mounted.
7. Once the outdoor wall lighting is mounted, connect the wiring. Follow the wiring instructions provided in the user manual. If you are unsure about the wiring process, it is recommended to consult a qualified electrician.
8. After the wiring is complete, double-check all connections to ensure they are secure and properly insulated.
9. Turn on the power supply and test the outdoor wall lighting to ensure it is functioning correctly.
Please note that the PHILIPS 9290032623 Mimosa Outdoor Wall Lighting comes with a non-changeable bulb, which means that when the bulb reaches the end of its lifespan, the entire outdoor wall lighting unit will need to be replaced.
For further information or specific details regarding the installation process, please refer to the user manual provided with the product.
Add New Comment