Answer

Mar 05, 2025 - 08:54 PM
To connect the camera to your network, follow these steps:
1. Loosen the nut from the main element of the camera.
2. Run the network cable (without RJ 45 connector) through both elements of the camera.
3. Crimp the cable with an RJ 45 connector.
4. Connect the cable to the waterproof connector.
5. Tighten the nut and the main cover of the camera.
For more detailed instructions and illustrations, please refer to the "Connecting Network Cable" section in the Speco Technologies O4iT1 4MP Intensifier IP Dome Camera User Guide.
Add New Comment