User Manual Q&AAnswer
Mar 05, 2025 - 08:40 PM
To connect the sprinklers to the hose in the EDEN 98063EDAMZ Flex Design Sprinkler and Hose Set with Hose Mender, follow these steps:
1. Cut the hose to match the distance between the sprinklers.
2. Unscrew the side hose connector on the sprinkler.
3. Insert the hose into the side hose connection on the sprinkler.
4. Tighten the connector to secure the hose in place.
5. Repeat these steps for each sprinkler in your system.
Please refer to the user guide for visual instructions and additional information.
Add New Comment