User Manual Q&AAnswer
Mar 05, 2025 - 08:33 PM
To install the Lucci 190786 Aura Mirror Cabinet with LED Backlight, please follow these steps:
1. Select a suitable location for installation, ensuring it is indoors and away from direct air vents. The mounting point should be able to support twice the weight of the product.
2. Remove all packaging material from the product and make sure no accessories are thrown away.
3. Use the mounting bracket template (EX1) provided to measure and mark the xxxx hole positions on the wall. Install the mounting brackets (AX2) onto the wall using appropriate mounting screws and anchors (BX6).
4. Remove the mirror from the cabinet by pressing the button on the hinge.
5. Remove the terminal box cover and grommet from the terminal box by loosening the screws at the top.
6. Connect the mains supply wire to the terminal block, ensuring the wires are secure and no bare wires are exposed. Refer to the manual for the correct wiring configuration.
7. Install the terminal box cover and grommet back onto the terminal box and secure it by tightening the screws.
8. Hang the cabinet onto the mounting brackets and use a spirit level to check if it is level. Adjust the cabinet if needed by using the holes inside the cabinet and a screwdriver.
9. Install the top bracket (CX1) to secure the cabinet onto the wall.
10. Reinstall the mirror back onto the cabinet hinges, ensuring the button on the hinge is locked into position.
11. Clean the mirror and cabinet with a soft damp cloth, avoiding corrosive chemicals or abrasive cleaners.
12. After installation, turn the power to the circuit back on and test all product functions.
Please note that this is just a summary of the installation process. For detailed instructions and safety precautions, refer to the complete instruction manual provided with the product.
Add New Comment