Answer

Mar 05, 2025 - 08:28 PM
To assemble the evolur PARKER CRIB 5-in-1 Convertible Crib, please follow these steps:
Step 1: Read the instructions thoroughly and identify all parts and hardware.
Step 2: Gather the necessary tools, including a Philips Head screwdriver, a Flat head screwdriver, and a hammer. Do not use power drills or drivers.
Step 3: Place the parts on a soft surface to protect them during assembly. Clean the surface using only water on a damp cloth. Do not use window cleaner or cleaning abrasive.
Step 4: Start assembling the crib according to the provided instructions, ensuring that you follow all warnings and assembly instructions to reduce the risk of injury or death.
Step 5: Check the product for damaged hardware, loose joints, missing parts, or sharp edges before and after assembly, as well as frequently during use. Do not use the crib if any parts are missing, damaged, or broken. Contact Évolur for replacement parts.
Step 6: Once assembled, adjust the mattress to the lowest position and remove bumper pads, large toys, and other objects that could serve as steps for climbing out when the child is able to pull to a standing position.
Step 7: Make sure the sides of the crib are properly latched or locked in the appropriate position when the child is left unattended in the crib.
Step 8: Do not use the crib when the child begins to climb out or reaches a height of 35 inches.
Step 9: Follow the instructions for converting the crib to a toddler bed or full-size bed, using the necessary guard rail and stabilizer bar for the toddler bed conversion, and bed rails (sold separately) for the full-size bed conversion.
Step 10: Follow the furniture care instructions provided to maintain the quality and longevity of the crib.
Please note that this answer is based on the information provided in the instruction manual for the evolur PARKER CRIB 5-in-1 Convertible Crib. It is important to thoroughly read and follow the instructions provided in the manual for accurate and safe assembly.
Add New Comment