How do I install the PANDUIT NK4MFBL NetKey Four Module Keystone Furniture Faceplate? (PANDUIT NK4MFBL NetKey Four Module Faceplate Instruction Manual)

Answer

manuals.plus

Mar 05, 2025 - 08:27 PM


To install the PANDUIT NK4MFBL NetKey Four Module Keystone Furniture Faceplate, please follow these steps:

1. Gather the necessary tools: You will need a screwdriver and the appropriate modules for your installation.

2. Prepare the wall: Ensure that the wall surface is clean and free from any debris or obstructions.

3. Position the faceplate: Hold the faceplate against the wall in the desired location. Make sure it is level and aligned properly.

4. Secure the faceplate: Insert screws into the mounting holes on the faceplate and tighten them using a screwdriver. Be careful not to overtighten, as it may damage the faceplate.

5. Install the modules: Once the faceplate is securely mounted, insert the desired modules into the corresponding openings. Push them firmly until they click into place.

6. Connect the cables: Connect the cables to the modules as required for your specific application. Follow the appropriate wiring instructions for each module.

7. Test the installation: Once all the modules and cables are connected, test the functionality of your installation to ensure everything is working correctly.

If you require further assistance or need instructions in a different language, you can visit the PANDUIT website at www.panduit.com/resources/install_mai.... Alternatively, you can contact PANDUIT's technical support team via email at techsupport@panduit.com or by phone at 866-405-6654. They will be able to provide you with additional guidance and support.