User Manual Q&AAnswer
Mar 05, 2025 - 08:10 PM
To attach the tablet holder to the Neomounts FL15-625WH1 Tablet Stand, please follow these steps:
1. Attach the pole to the base of the stand.
2. Install the stand on the floor.
3. Connect the upper pole with the lower pole.
4. Attach the holder to the pole.
5. Attach the adhesive pads to the holder according to the depth of your tablet:
- F. 2 mm - for tablet depth 7.5-8.5 mm
- G. 3 mm - for tablet depth 6.5-7.5 mm
- H. 4 mm - for tablet depth less than 6.5 mm
6. Place the tablet in the holder and lock the holder.
7. Route the cables through the rod.
8. Adjust the mount to your desired position.
Please refer to the Neomounts FL15-625WH1 Tablet Stand Instruction Manual for more detailed instructions and illustrations. Make sure to read the manual carefully before installation to ensure safety and proper usage of the product.
Add New Comment