User Manual Q&AAnswer
Mar 05, 2025 - 07:46 PM
To charge the FlashQ M20 flash camera, you can use rechargeable Ni-MH batteries or non-rechargeable AA-size alkaline batteries. If you are using rechargeable Ni-MH batteries, connect the FlashQ M20 to a computer or USB power adapter using the included USB cable. The USB Charging Indicator will turn ORANGE during charging and GREEN when charging is complete. It takes approximately 4.5 hours to fully charge two 2500mAh Ni-MH batteries with the FlashQ M20.
However, if you are using non-rechargeable AA-size alkaline batteries, DO NOT attempt to recharge them using USB charging. It is important to note that the FlashQ M20 also accepts non-rechargeable batteries, but they should not be recharged. Make sure to install the batteries with the correct polarity and remove them from the FlashQ M20 when not in use for a prolonged period. Additionally, a single AA-size battery cell cannot exceed 1.5V, so the use of high-voltage lithium batteries is prohibited.
Please refer to the FlashQ M20 Flash Camera User Manual for more detailed instructions and safety precautions regarding charging the device.
Add New Comment