Answer

Mar 05, 2025 - 07:39 PM
To install the Kimberly-Clark 53659 ICON Single Sheet Toilet Paper Dispenser, please follow these steps:
1. Gather the necessary tools: You will need a screwdriver and mounting screws (not included).
2. Choose a suitable location: Select a convenient and accessible location near the toilet. Ensure there is enough space for the dispenser and that it is within reach for easy paper retrieval.
3. Prepare the dispenser: Open the dispenser by unlocking the cover and removing it from the base. Take out the spindle and set it aside.
4. Mount the base: Hold the base against the wall at the desired location. Mark the positions of the mounting holes on the wall using a pencil. Make sure the base is level.
5. Install the base: Using a screwdriver, secure the base to the wall by inserting the mounting screws through the holes and tightening them until the base is firmly attached.
6. Insert the spindle: Take the spindle and insert it into the dispenser base. Ensure it is properly aligned and securely in place.
7. Load the toilet paper: Open the toilet paper package and remove the core. Slide the roll onto the spindle, making sure the paper feeds from the bottom of the roll.
8. Close the cover: Place the cover back onto the dispenser base and lock it in place. Ensure it is securely closed to prevent tampering.
9. Test the dispenser: Pull the paper from the dispenser to ensure it dispenses smoothly and without any issues.
Please note that these instructions are a general guide. For specific details and illustrations, refer to the Kimberly-Clark 53659 ICON Single Sheet Toilet Paper Dispenser User Guide provided with the product.
Add New Comment