User Manual Q&AAnswer
Mar 05, 2025 - 07:37 PM
To set up the BLUETTI EP600 Energy Storage System for indoor use, follow these steps:
1. Choose a suitable location: Select a well-ventilated area with sufficient space for the EP600 and its battery modules. Ensure that the area is free from direct sunlight, excessive heat, and moisture.
2. Connect the battery modules: Depending on the desired capacity, connect the appropriate number of battery modules to the EP600. The EP600 supports up to 8 battery modules.
3. Connect the EP600 to the mains power supply: Plug the EP600 into a standard AC power outlet using the provided power cord. Ensure that the power outlet is properly grounded.
4. Turn on the EP600: Press and hold the power button located on the front panel of the EP600 for a few seconds until the device powers on. The LED indicators will light up, indicating that the system is ready for use.
5. Install the BLUETTI APP: Download and install the BLUETTI APP on your smartphone or tablet from the App Store or Google Play Store.
6. Connect the EP600 to the BLUETTI APP: Open the BLUETTI APP and follow the on-screen instructions to connect the EP600 to your mobile device via Wi-Fi or Bluetooth. This will allow you to monitor and control the EP600 remotely.
7. Configure energy settings: Using the BLUETTI APP, you can customize energy settings such as charging modes, discharge modes, and power output priorities according to your specific needs.
8. Test the system: Once the EP600 is set up and connected, you can test its functionality by connecting various devices to the AC outlets or using the USB ports to charge your devices. Monitor the battery level and power output through the BLUETTI APP.
For more detailed instructions and safety guidelines, please refer to the BLUETTI EP600 6000W Energy Storage System User Manual.
Add New Comment