Answer

Mar 05, 2025 - 07:35 PM
To set up the INTELLINET 561952 Ultra Long Range Outdoor Fast Ethernet PoE+ Extender Kit, follow these steps:
1. Make sure both extender units are used together.
2. Connect a Cat5e/6 Ethernet cable (up to 100m long) from your powered source device (e.g., PoE injector or switch) to the Output connector on one extender.
3. Connect a second Cat5e/6 Ethernet cable (up to 800m long) from the Input on the first extender to the Input on the second extender.
4. Connect a third Cat5e/6 Ethernet cable (up to 100m long) from the Output on the second extender to the device you want to transmit power and data to (e.g., a PoE network camera).
Note: Ensure that all cable connections are made waterproof by following the steps mentioned in the manual. Use a wrench to ensure tight connections when necessary.
For more detailed information, including power and data delivery based on cable lengths and equipment capabilities, refer to the specifications link provided in the manual.
Please refer to the manual for any additional information or troubleshooting steps.
Add New Comment