User Manual Q&AAnswer
Mar 05, 2025 - 07:33 PM
To install and replace the batteries in the KaWe EUROLIGHT Ophthalmoscope Pocket Set Two Handles, please follow the instructions provided in the user manual. Here is a step-by-step guide:
1. For KaWe EUROLITE models:
a) Place the ophthalmoscope head on the handle with the battery and secure it with the xxxx .
b) Insert batteries into the handle, observing the polarity and the lamp voltage (2.5 or 3.5 V).
c) Switch on the ophthalmoscope by pressing the white switch and moving the light regulator to the left. To switch it off, move the light regulator to the initial position 0. Brightness can be adjusted smoothly.
2. For KaWe PICCOLIGHT models:
a) Place the ophthalmoscope head on the handle with the battery and secure it until it clicks, observing the position of the cutout.
b) Insert batteries into the handle, observing the polarity and the lamp voltage (2.5 or 3.5 V).
c) Switch on the ophthalmoscope by pressing the white switch and moving the light regulator to the left. To switch it off, move the light regulator to the initial position 0. Brightness can be adjusted smoothly.
Please refer to Section 8: Maintenance and Service in the user manual for detailed information on battery installation and replacement.
Note: It is important to use new, high-quality alkaline batteries or fully charged batteries. Regularly check the battery charge and replace or recharge them as necessary.
Add New Comment