User Manual Q&AAnswer
Mar 05, 2025 - 07:09 PM
To charge the Celestron 18768 Pro PowerTank Lithium, follow these steps:
1. Determine the appropriate AC plug adapter for your location and slide it into place on the charger body.
2. Remove the rubber cover from the charging port on the side of the PowerTank Lithium Pro and plug in the charger's cable.
3. Plug the charger into an electrical outlet. The adapter can accept an input of 100 to 240V at 50/60Hz.
4. The battery indicator lights will blink while charging. When charging is complete, all of the lights will remain lit.
Note: If you are traveling internationally, you may need to change to a different plug adapter. Depress the locking button on the charger, slide off the current adapter, and replace it with the adapter you need.
Warning: Do not attempt to use the charger to power your telescope directly, as it can cause significant damage.
For more detailed instructions and safety information, please refer to the Celestron 18768 Pro PowerTank Lithium Instruction Manual.
Add New Comment