User Manual Q&AAnswer
Mar 05, 2025 - 07:04 PM
To install the Blueridge BY650 Adjustable Wall Bracket for Ductless Mini Splits, follow these steps:
1. Mount the Crossbar: Use the level embedded in the crossbar to ensure it is level. Attach the crossbar to the wall using hardware/anchor designed for the material type you are mounting into. Make sure the hardware can properly support the weight and specifications of your unit.
2. Attach the L-Bar Brackets: Unfold the L-Bar brackets and slide them onto the crossbar to the desired position. Use the bolts provided in package 2 to lock the L-Bar brackets in place.
3. Adjust the Angle: Adjust the angle of the L-Bar brackets according to your needs. This will depend on the specific installation requirements of your mini-split condensing unit.
4. Secure the Mini-Split Condensing Unit: Use the hardware provided in package 3 to secure the mini-split condensing unit to the L-Bar brackets. This will ensure stability and prevent vibrations.
Please note that the specific anchor and bolt sizes required may vary depending on the material you are mounting into and the weight specifications of your unit. Make sure to refer to the manual for any additional instructions or guidelines specific to your installation.
Add New Comment