How do I install the Neomounts WL30-550BL18 TV wall mount on a solid brick or concrete wall? (Neomounts WL30-550BL18 TV Wall Mount User Manual)

Answer

manuals.plus

Mar 05, 2025 - 07:02 PM

To install the Neomounts WL30-550BL18 TV wall mount on a solid brick or concrete wall, follow these steps:

1. Step 1B: Install the wall plate on a solid brick or concrete wall.
- Use a stud finder to locate the solid areas of the wall.
- Mark the desired mounting location on the wall.
- Drill holes into the solid brick or concrete wall using a masonry drill bit.
- Insert the provided wall anchors into the drilled holes.
- Align the wall plate with the drilled holes and secure it to the wall using the provided screws.

2. Step 2: Install the adapter brackets and use spacers if necessary.
- Attach the adapter brackets to the back of your TV or screen using the provided screws.
- If needed, use the provided spacers to ensure proper alignment and clearance between the TV and the wall.

3. Step 3: Attach the screen onto the bracket and secure it.
- Lift the TV or screen and align the adapter brackets with the corresponding slots on the wall plate.
- Slide the TV or screen downward until it locks into place on the wall plate.
- Ensure that the screen is securely attached to the bracket.

4. Step 4: Pull the straps to release the screen.
- To remove the TV or screen from the wall mount, locate the release straps on the bottom of the wall plate.
- Pull the straps downward to release the screen from the bracket.

Please note that the above steps are a general guideline. It is important to refer to the specific instructions and diagrams provided in the Neomounts WL30-550BL18 TV wall mount user manual for accurate installation.