How do I install the Neomounts WL30-550BL14 TV Wall Mount on a solid brick or concrete wall? (Neomounts WL30-550BL14 TV Wall Mount Instruction Manual)

Answer

manuals.plus

Mar 05, 2025 - 07:01 PM

To install the Neomounts WL30-550BL14 TV Wall Mount on a solid brick or concrete wall, follow these steps:

1. Prepare the necessary tools and parts mentioned in the manual.
2. Locate a suitable spot on the wall where you want to mount the TV.
3. Use a stud finder to locate any wooden studs behind the brick or concrete wall. If you find a stud, proceed to Step 1. If not, continue to Step 1 B.
4. STEP 1 B: Install the wall plate on a solid brick or concrete wall.
a. Drill holes into the brick or concrete wall using a masonry drill bit and a hammer drill.
b. Insert wall anchors into the drilled holes.
c. Align the wall plate with the drilled holes and attach it to the wall using screws and washers provided.
d. Ensure that the wall plate is securely attached to the wall.

5. Proceed to Step 2: Install the adapter brackets and use spacers if necessary.
6. Follow the instructions in the manual to attach the adapter brackets to the back of your TV.
7. If necessary, use spacers provided to ensure a proper fit between the TV and the bracket.
8. Proceed to Step 3: Attach the screen onto the bracket and secure it.
9. Carefully lift the TV and align the adapter brackets with the bracket on the wall plate.
10. Securely attach the TV to the bracket using the provided screws and washers.
11. Ensure that the TV is properly secured and does not wobble.

Please note that these instructions are a general guide. It is essential to refer to the specific instructions provided in the Neomounts WL30-550BL14 TV Wall Mount Instruction Manual for accurate installation steps and any additional precautions.