User Manual Q&AAnswer
Mar 05, 2025 - 06:16 AM
To properly install the tipping restraint for the ASHLEY W814-68 Extra Large TV Stand, please follow these steps:
1. Locate the included tipping restraint in the packaging. It should be in a plastic bag with instructions.
2. Find a suitable wall stud or use a wall anchor to secure the tipping restraint to the wall. Make sure the wall anchor is appropriate for the type of wall you are mounting it on.
3. Position the TV stand against the wall in the desired location. Ensure that the stand is level by using a leveler. If the unit is placed on an unlevel surface, place a leveler underneath one foot until the unit is level.
4. Attach one end of the tipping restraint to the back of the TV stand using the provided screws or fasteners. Refer to the instructions on the plastic bag for the specific installation method.
5. Attach the other end of the tipping restraint to the wall using the appropriate screws or wall anchors. Make sure it is securely fastened to prevent tipping.
6. Once the tipping restraint is properly installed, periodically check to ensure that it remains secure and tight. This will help reduce the risk of furniture tip-over.
Please note that while the use of the included tipping restraint may reduce the risk of furniture tip-over, it does not eliminate it completely. It is important to follow the instructions provided and ensure that the TV stand is properly assembled and used according to the manufacturer's guidelines to ensure safety.
For any further assistance or if you have any additional questions, please refer to the installation guide that came with the product or contact the retailer from which you purchased the ASHLEY W814-68 Extra Large TV Stand.
Add New Comment