Answer

Mar 05, 2025 - 04:50 AM
To calibrate the LAICA LC02 Mechanical Personal Scales, follow these steps:
1. Before stepping on the scales, exert pressure on them 2 or 3 times and ensure that the needle indicates 0. If the needle does not indicate 0, you need to zero the scales using the zero wheel.
2. Locate the zero wheel, which is usually located at the bottom of the scales near the dial.
3. Turn the zero wheel until the needle points to 0 on the dial.
4. Once the needle is at 0, the scales are calibrated and ready to use.
Note: It is important to calibrate the scales regularly to ensure accurate measurements. If the needle does not go back to 0 even after calibration, there may be an issue with the scales and you should contact the retailer or Laica for further assistance.
Please refer to the instruction manual for more detailed information and illustrations on how to calibrate the LAICA LC02 Mechanical Personal Scales.
Add New Comment