How do I assemble the PETITPUK George Low Rise Version Bunk Bed? (PETITPUK George Low Rise Version Bunk Bed Instruction Manual PETITPUK George Low Rise Version Bunk Bed Instruction Manual)

Answer

manuals.plus

Mar 05, 2025 - 03:52 AM

To assemble the PETITPUK George Low Rise Version Bunk Bed, please follow these steps:

1. Before starting, ensure that all the pieces are complete and in good shape. Also, make sure you have a partner to assist you during the assembly process.

2. Take a photo of your work before and after assembly to share it with PETITPUK.

3. You will find small green glue tubes with EU standards. Use a small amount of glue in the holes to receive the wood dowels. Glue is only necessary for the beveled wood stud assemblies to ensure stability. Do not put glue on the bed base to allow for future dismantling.

4. Pay attention to which side you mount the long beam with the holes for the ladder holder, as it will determine the side where the ladder will be placed.

5. Cover all other openings with plugs.

6. If you have a drawer or climbing wall, follow the specific instructions provided in the Assembly Manual PETIT PUK.

7. Once assembly is complete, take a photo and share it with PETITPUK via email or on Instagram using the hashtag #petitpuk.

Important reminders:

- Use a mattress with a thickness of 8-14 cm.
- The bunk bed is for sleeping, not for jumping.
- Only one person should be on the bunk bed at a time.
- Do not hang on the construction components.
- Clean wooden and plastic parts with a dry cloth and mild care products for raw wood.
- The bed parts have a warranty of 2 years under normal use.
- If you encounter any issues, contact PETIT PUK with your name, order number, and accompanying photos of the situation.

For further assistance or clarification, you can visit the PETIT PUK website at www.petitpuk.com.