User Manual Q&AAnswer
Mar 05, 2025 - 03:32 AM
To program the , please follow the steps below:
1. Open the battery cover located on the back of the remote control.
2. Insert a 3V battery (CR2430) into the battery compartment, ensuring the correct polarity.
3. Close the battery cover securely.
4. Locate the receiver unit of your motorline PROFESSIONAL system.
5. On the receiver unit, locate the programming button or switch.
6. Press and hold the programming button or switch until the LED indicator on the receiver starts flashing.
7. Within 10 seconds, press and release the desired button on the remote control that you want to program (e.g., Up/Open, OK/Stop, Down/Close).
8. The LED indicator on the receiver should stop flashing, indicating that the programming was successful.
9. Test the remote control by pressing the programmed button to operate your motorline PROFESSIONAL system.
Please note that these instructions are general guidelines, and it's recommended to refer to the specific user manual provided with your motorline PROFESSIONAL MX95N 1-Channel Radio Remote Control for detailed programming instructions and any additional steps specific to your system.
Add New Comment