User Manual Q&AAnswer
Mar 05, 2025 - 03:25 AM
To connect the SUNDRAX Wireless Splitter Pro/Pro Duo to your lighting equipment, please follow these steps:
1. Verify protective earthing and cable connections: Before mounting and powering up the device, ensure that the protective earthing and cable connections are properly installed.
2. Install the device into the rack: Secure the device in a 19-inch rack using screws.
3. Connect the power cable: Plug the power cable into a power outlet.
4. Connect the input cable: If you are using the Splitter Pro device, connect the cable to the "IN" input port. If you are using the Splitter Duo Pro device, connect the cable to the appropriate input port ("IN COM", "IN A", or "IN B"). The corresponding port indicator will light up green if the input signal is present, or red if there is no signal.
5. Connect the output lines: Connect the desired number of output lines to the "OUT" connectors on the device.
6. The device is now ready for use.
Please refer to the SUNDRAX Wireless Splitter Pro/Pro Duo User Manual for more detailed instructions and illustrations on the installation process.
Add New Comment