User Manual Q&AAnswer
Mar 05, 2025 - 02:55 AM
To pair the sensor with the weather station, follow these steps:
1. Enter the setup mode on the weather station console.
2. Select "Setup" next to "More" to access the More screen.
3. Select "Setup" next to "Sensors ID" to access the Sensors ID screen.
4. Select the Sensor ID next to the sensor you want to register. The pool float sensor will be labeled as T&H (Temperature and Humidity).
5. Select "Disable" to turn off the sensor if it is already registered.
6. Select "REGISTER" to re-register the sensor to the console.
Once the pairing is complete, return to the home screen to view the pool float data on the weather station console.
Note: The specific instructions may vary depending on the model of your weather station. Please refer to the user manual for your specific model for detailed instructions.
Add New Comment