User Manual Q&AAnswer
Mar 05, 2025 - 02:52 AM
To install the Freedompro 4C 5 A 110-230 V Audio Visual Intelligence device, follow these steps:
1. Disconnect the power from the system before starting the installation.
2. Attach the device to the DIN rail of an electrical panel or inside a junction box. Ensure that only the central part of the front panel is accessible to the user after installation.
3. Remove the covers from the terminals using a screwdriver.
4. Connect the accessory cables to the top connectors as shown in the wiring diagrams.
5. Connect the control cables to the lower connectors as shown in the wiring diagrams.
6. Connect the power supply to the device as shown in the wiring diagrams.
7. Double-check that the wiring is correct and restore the power supply to the electrical system.
8. Reapply the covers over the terminals.
9. After connecting and powering up the device, use the Freedompro app and follow the instructions to proceed with the final configuration step.
Please note that the installation of the device should be performed by a qualified electrician, and any changes to the wiring should only be made after ensuring that there is no voltage in the electrical system. Make sure to follow the illustrated wiring diagram exactly to avoid any issues.
For more detailed information and illustrations, refer to the instruction manual provided with the device.
Add New Comment